Jointless Redecking
If you're redecking a bridge, why not eliminate a major cause of its corrosion at the same time? Why not remove the expansion joints? The Department of Public Works in Steuben...

A New Look at Galvanized Bridges
Engineers are rediscovering that galvanizing is one of the longest lasting methods of imparting corrosion protection to steel bridges. It also avoids the stringent new EPA regulations...

Damage Evolution in Reinforced Concrete Members Under Cyclic Loading
The paper presents a new damage indicator D, valid for reinforced concrete sections under cyclic loading. DQ, based on sectionally absorbed energies,...

Reliability Analysis of Continuous Beam and Frame Structural Systems
In this paper, by adopting the cross sections where plastic hinges form as the analysed units, the problem of structure system reliability of continuous beam and simple frame is discussed....

Spectral Distribution Free Bounds on the Response Variability of Stochastic Systems
A methodology to analytically and numerically evaluate the spectral distribution-free upper bounds of the response variability of stochastic systems is developed. The structural systems...

Random Vibrations of Discrete and Continuous Inelastic Structures
Nonstationary random vibrations of elasto-plastic cantilever beams excited by earthquakes are studied, where a finite spread of inelastic zones is taken into account. Following a complete...

Fatigue Reliability of Prestressed Concrete Bridges
Experimental studies indicate that fatigue is a random phenomenon. Therefore, the approach is based on probabilistic methods. The fatigue life of the prestressed concrete girder is estimated...

Structural Reliability of Wood Beam-Columns
A formulation for reliability-based design procedures of wood columns and beam columns is presented. The load carrying capacity of these structural members is obtained using a non-linear...

Statistical Properties of Prestressed Concrete Beams in Shear
Monte Carlo simulations were performed on prestressed concrete rectangular and tee-section beams in shear produced by a single concentrated load at mid span. The truss analogy model was...

Design Method Satisfying Safety Requirements for Various Limit-States Based on Information Integration Method
This paper discusses the applicability of the information integration method to optimum design of structures and the advantages of the above optimum structural design method over other...

Effect of Gravity on Dynamic Behavior of Beams
Large space structures will be needed to provide structural framework for maintaining relative positions of individual components of systems in low earth orbit. Particularly because of...

Fiber Reinforced Plastic Grids for the Structural Reinforcement of Concrete
The use of fibre resin plastic grid is investigated as a primary bending reinforcement in concrete members. Laboratory bending data is compared with theoretical results using ACI 318-83...

Beam-To-Column Connections for Pultruded FRP Structures
Moment-rotation and strength characteristics of beam-to-column bolted connections of fiber reinforced plastic (FRP) pultruded wide-flange structural shapes are discussed. Results of experimental...

Properties of Flyash Cellular Concrete
A research program was conducted with the aim of studying the physical and flexural properties of cellular concrete containing flyash. Two different types of fibers were also added to...

Flexural Strength of Externally Reinforced Concrete Beams
Results from tests of one rectangular and one T-beam are reported. The beams were strengthened by epoxy-bonding a 1/4 in. (6 mm) thick Glass Fiber Reinforced Plastic plate along the tension...

Structural Details: Is Anything Missing?
While actual failure of a structure is uncommon, many projects have less publicized, detailing-related difficulties involving rework, changes, clarifications, and increased costs. If the...

Form Follows Geometry
The $107 million NCNB Plaza in Tamps, Fla. consists of a 32 floor, 500,000 sq ft, 455 ft tall office tower; a 40,000 sq ft, 78 ft tall banking hall, and a 280,000 sq ft parking garage...

Vibrations of Linearly Tapered Cantilever Beams
Originally published in: Journal of the Engineering Mechanics Division, ASCE, EM2, April 1962, pp. 95-123...

New Piers for an Old Bridge
Placing new piers under an old superstructure has saved the architecture of the historic Ashley River Bridge in Charleston, S.C. In July 1987, an inspection indicated deterioration and...

Rebuilding Philadelphia's El
In reconstructing an urban transit system, the challenge in Philadelphia was to do it without disrupting peak hour commuter traffic or disturbing activities on the street and sidewalks...

 

 

 

 

Return to search